P>copy r copy ? STRING [drive][path][file name] flash: Device name sa save The current configuration will be written to the device. Are you sure? [Y/N]:Y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. di dir Directory of flash:/ 0 -rw- 2416 Apr 26 2000 12:13:56 config.cfg 1 -rw- 33 Apr 26 2000 12:13:54 system.xml 2 -rw- 852926 Apr 26 2000 13:05:10 logfile.log 3 drw- - Apr 26 2000 12:00:56 seclog 4 -rw- 31541248 Apr 30 2000 11:10:13 a5800_5820x-cmw520-r1808p21-us.bin 5 -rw- 27439140 Jul 19 2012 10:59:09 a5800_5820x-cmw520-r1211p06.bin 515712 KB total (453120 KB free) di dis display co display copyright display command-alias display r display rp display rps display ^ % Incomplete command found at '^' position. display co display copyright Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved. This document provides copyright information regarding any third-party software that is included, either in whole or in part, in this product. This product contains third-party software components and they will be used and distributed under their respective licenses. This product contains some components under the GNU General Public License ("GPL") version 2.0, the GNU Lesser General Public License("LGPL") version 2.1 or other open source licenses. H3C agrees to provide the open source code which is under GPL for three (3) years from the first release date of the software. If you want to obtain a copy of GPL licensed source code associated with this product, please send a request to legal@h3c.com or write to Hangzhou H3C technology Co., Ltd. 310 of Liuhe Rd, Zhijiang Science Park, Hangzhou 310005, P.R. China.The product name and version number of the software, your name, phone number and address should be included in the request. H3C reserves the right to charge an amount of cost for distribution of source code , consistent with the GPL license terms. You can also obtain a copy of the GPL and LGPL at http://www.gnu.org/licenses/. BSD License Copyright (c) 1982, 1986, 1990, 1991, 1993 he Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Apache License, Version 2.0 Copyright (c) 1999-2006 The Apache Software Foundation. Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work(an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by h sh sho show ^ % Unrecognized command found at '^' position. syst system-view System View: return to User View with Ctrl+Z. [HP]sh [HP]shutdown-interval [HP]show tech ^ % Unrecognized command found at '^' position. [HP]dis [HP]display config ^ % Unrecognized command found at '^' position. [HP]di [HP]display curr [HP]display current-configuration # version 5.20.105, Release 1808P21-US # sysname HP # irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # cwmp undo cwmp enable # interface NULL0 # interface Vlan-interface1 ip address 10.0.0.1 255.255.255.0 # interface GigabitEthernet1/0/25 port link-mode bridge # interface GigabitEthernet1/0/26 port link-mode bridge # interface GigabitEthernet1/0/27 port link-mode bridge # interface GigabitEthernet1/0/28 port link-mode bridge # interface M-GigabitEthernet0/0/0 # interface Ten-GigabitEthernet1/0/1 port link-mode bridge # interface Ten-GigabitEthernet1/0/2 port link-mode bridge # interface Ten-GigabitEthernet1/0/3 port link-mode bridge # interface Ten-GigabitEthernet1/0/4 port link-mode bridge # interface Ten-GigabitEthernet1/0/5 port link-mode bridge # interface Ten-GigabitEthernet1/0/6 port link-mode bridge # interface Ten-GigabitEthernet1/0/7 port link-mode bridge # interface Ten-GigabitEthernet1/0/8 port link-mode bridge # interface Ten-GigabitEthernet1/0/9 port link-mode bridge # interface Ten-GigabitEthernet1/0/10 port link-mode bridge # interface Ten-GigabitEthernet1/0/11 port link-mode bridge # interface Ten-GigabitEthernet1/0/12 port link-mode bridge # interface Ten-GigabitEthernet1/0/13 port link-mode bridge # interface Ten-GigabitEthernet1/0/14 port link-mode bridge # interface Ten-GigabitEthernet1/0/15 port link-mode bridge # interface Ten-GigabitEthernet1/0/16 port link-mode bridge # interface Ten-GigabitEthernet1/0/17 port link-mode bridge # interface Ten-GigabitEthernet1/0/18 port link-mode bridge # interface Ten-GigabitEthernet1/0/19 port link-mode bridge # interface Ten-GigabitEthernet1/0/20 port link-mode bridge # interface Ten-GigabitEthernet1/0/21 port link-mode bridge # interface Ten-GigabitEthernet1/0/22 port link-mode bridge # interface Ten-GigabitEthernet1/0/23 port link-mode bridge # interface Ten-GigabitEthernet1/0/24 port link-mode bridge # load xml-configuration # load tr069-configuration # user-interface aux 0 user-interface vty 0 15 # return [HP] us [HP]user-interface [HP]user-profile [HP]usb [HP]user-group [HP]loc [HP]local-user manager pas [HP]local-user manager passw [HP]local-user manager password enatco_39 ^ % Too many parameters found at '^' position. [HP]local-user manager password cipher enatco_39 ^ % Too many parameters found at '^' position. [HP]local-user manager New local user added. [HP-luser-manager]local-user manager password cipher enatco_39 ^ % Unrecognized command found at '^' position. [HP-luser-manager]pas [HP-luser-manager]password ci [HP-luser-manager]password cipher enatco_39 [HP-luser-manager]aut [HP-luser-manager]authorization-attribute le [HP-luser-manager]authorization-attribute level 15 ^ % Wrong parameter found at '^' position. [HP-luser-manager]authorization-attribute level [HP-luser-manager]authorization-attribute level [HP-luser-manager]authorization-attribute level ? INTEGER<0-3> Level of user [HP-luser-manager]authorization-attribute level 3 [HP-luser-manager]save The current configuration will be written to the device. Are you sure? [Y/N]:Y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]: Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. [HP-luser-manager]exit ^ % Unrecognized command found at '^' position. [HP-luser-manager] di disp display curr display current-configuration # version 5.20.105, Release 1808P21-US # sysname HP # irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user manager password cipher $c$3$UCywQqMTWrUNjYqH4RWGLp/8Uii2LIfQ36pVJw== authorization-attribute level 3 # cwmp undo cwmp enable # interface NULL0 # interface Vlan-interface1 ip address 10.0.0.1 255.255.255.0 # interface GigabitEthernet1/0/25 port link-mode bridge # interface GigabitEthernet1/0/26 port link-mode bridge # interface GigabitEthernet1/0/27 port link-mode bridge # interface GigabitEthernet1/0/28 port link-mode bridge # interface M-GigabitEthernet0/0/0 # interface Ten-GigabitEthernet1/0/1 port link-mode bridge # interface Ten-GigabitEthernet1/0/2 port link-mode bridge # interface Ten-GigabitEthernet1/0/3 port link-mode bridge # interface Ten-GigabitEthernet1/0/4 port link-mode bridge # interface Ten-GigabitEthernet1/0/5 port link-mode bridge # interface Ten-GigabitEthernet1/0/6 port link-mode bridge # interface Ten-GigabitEthernet1/0/7 port link-mode bridge # interface Ten-GigabitEthernet1/0/8 port link-mode bridge # interface Ten-GigabitEthernet1/0/9 port link-mode bridge # interface Ten-GigabitEthernet1/0/10 port link-mode bridge # interface Ten-GigabitEthernet1/0/11 port link-mode bridge # interface Ten-GigabitEthernet1/0/12 port link-mode bridge # interface Ten-GigabitEthernet1/0/13 port link-mode bridge # interface Ten-GigabitEthernet1/0/14 port link-mode bridge # interface Ten-GigabitEthernet1/0/15 port link-mode bridge # interface Ten-GigabitEthernet1/0/16 port link-mode bridge # interface Ten-GigabitEthernet1/0/17 port link-mode bridge # interface Ten-GigabitEthernet1/0/18 port link-mode bridge # interface Ten-GigabitEthernet1/0/19 port link-mode bridge # interface Ten-GigabitEthernet1/0/20 port link-mode bridge # interface Ten-GigabitEthernet1/0/21 port link-mode bridge # interface Ten-GigabitEthernet1/0/22 port link-mode bridge # interface Ten-GigabitEthernet1/0/23 port link-mode bridge # interface Ten-GigabitEthernet1/0/24 port link-mode bridge # load xml-configuration # load tr069-configuration # user-interface aux 0 user-interface vty 0 15 # return di dis display vl display vlan Total 1 VLAN exist(s). The following VLANs exist: 1(default), display vlan ? INTEGER<1-4094> VLAN ID all All the VLANs dynamic Dynamic VLAN ID reserved Reserved VLAN ID static Static VLAN ID | Matching output display vlan st display vlan static ? | Matching output display vlan static Total 1 static VLAN exist(s). The following static VLANs exist: 1(default), syst system-view System View: return to User View with Ctrl+Z. [HP]loc [HP]local-user mana [HP]local-user manager [HP-luser-manager]ser [HP-luser-manager]service-type ss [HP-luser-manager]service-type ssh tel [HP-luser-manager]service-type ssh telnet [HP-luser-manager]service-type ssh telnet [HP-luser-manager]service-type ssh telnet ? terminal TERMINAL service type [HP-luser-manager]service-type ssh telnet term [HP-luser-manager]service-type ssh telnet terminal [HP-luser-manager]save The current configuration will be written to the device. Are you sure? [Y/N]:Y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]:Y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully.